Browse all practice questions for the Society of Professional Rope Access Technicians (SPRAT) Level 1 Practice Test. Search by topic, open any question and review its full explanation, then test yourself in the practice quiz.

Society of Professional Rope Access Technicians (SPRAT) Level 1 Practice Test course image
More practice questions

These questions are part of the practice quiz. Start practicing

  • What should you do if you hear a rope slip or hear unusual noises?
  • What are the two harness attachment points called?
  • Which device type should allow for controlled descent and braking?
  • Which statement correctly summarizes the minimum MBS guidance for a two-rope anchorage system?
  • What should you do if there is a fallen object risk on a rope access site?
  • What factors should be considered when selecting a rope for a job?
  • What does the Job Safety Analysis involve?
  • Which is a key element of a buddy check before starting work?
  • Name a commonly used stopper knot.
  • What is the correct procedural action when defects are found?
  • What is essential to ensure a proper tie-in with the harness?
  • Which term describes the object that bears the load of a rope access system?
  • Which items are considered mandatory PPE for SPRAT Level 1 operations?
  • Which items are contained in the Work Method?
  • The harness used for rope access should be of which type?
  • What is the purpose of a two-person communication protocol during rope access?
  • What is a proper action when documenting equipment defects or incidents?
  • The Review of the Work Environment will address which topics?
  • What constitutes a compliant anchor line for SPRAT Level 1?
  • What is the recommended process for cleaning and drying after use?
  • In a rope access operation, what is the proper term for the hazard area where dropped objects may pose a risk?
  • During pre-use checks of a descent device, which factor is essential for safe operation?
  • What is the minimum number of anchors required for main and backup systems?
  • Which action best reduces the risk of rope abrasion at edges?
  • Who should you consult if you are unsure about rigging?
  • What is the purpose of a pre-job briefing with the team?
  • Rope behavior for SPRAT ropes is typically:
  • Which statement best describes when you should involve a supervisor?
  • What does the term 'load path' refer to in rope access?
  • What is the maximum horizontal separation between independent main rope systems in a dual main system?
  • What is edge protection and why is it important in rope-access work?
  • What is the correct action if you feel a fall arrest device overheats?
  • Which term refers to using a directional anchor to move a two-rope setup away from the fall line?
  • What is the purpose of a backup knot in rope access?
  • Which outcome is not directly affected by maintaining a clean work area?
  • Rope Access harness used for rope access shall be of the
  • When is dynamic testing appropriate?
  • Which factor is NOT listed among rope selection considerations?
  • What is the purpose of the Rescue Plan?
  • Which statement best describes a two-rope anchorage system?
  • Which statement describes when supervisor involvement is appropriate according to SPRAT Level 1 guidelines?
  • Which knot is used to create a friction hitch for ascending in rope access?
  • What is a 'working line' in rope access terminology?
  • What is the recommended practice for the backup device to limit free fall potential?
  • What is a common method to manage rope slack during movement?
  • Which factor is most important when selecting rope diameter?
  • Backup systems are implemented to achieve which of the following outcomes?
  • How should a full-body harness be worn and secured before rope work?
  • Which document describes how a particular job should be undertaken?
  • Which role would typically oversee the safety program and ensure compliance with procedures across the rope access operation?
  • Ropes are made from which materials?
  • Which sequence represents the typical steps for a basic SPRAT Level 1 ascent?
  • What does 'tie-in' mean in SPRAT rope access?
  • The ___ is the entire system, including anchorage system(s), rope(s), and/or equipment required to support the expected forces of a rope access technician or a load during normal use.
  • Which statement about anchor redundancy best describes proper practice?
  • What is a two-rope system used for in SPRAT?
  • What is kernmantle rope?
  • Who is described as the person responsible for the entire rope access work site, including management of other technicians?
  • What is the function of a watch/runner in rope systems?
  • If equipment shows damage in the field, what is the standard practice?
  • Carabiners are designed to be loaded along the
  • Which position is responsible for supervising the entire rope access work site and coordinating other technicians?
  • Which two factors define acceptable anchor redundancy?
  • Which statement about SPRAT ropes is true?
  • Equipment used for rope access ______ be compatible with other components of the system.
  • Which device used for rope access is designed to prevent detachment from the rope during normal use?
  • Why is it important to avoid dynamic testing of equipment in normal work routines?
  • Equipment inspection should be conducted from purchase to retirement.
  • Which topic is included in a basic SPRAT Level 1 toolbox talk?
  • Special Permits shall be determined by the work being conducted and include which items?
  • Why is a tidy and organized workspace important in rope access?
  • When choosing rope diameter, which factor is essential?
  • What should you do if you notice a suspected damaged rope during inspection?
  • In rope access, the technique of using a directional anchor to move a two-rope system away from the fall line is known as what?
  • What is the purpose of labeling a rope as out of service?
  • Fall Zone Extends a minimum Distance is how many meters?
  • How should rope be cleaned and dried after use to prolong life?
  • What is the term for any area where a person may be at risk due to work, such as dropped tools?
  • Tools or equipment weighing more than ______ should be suspended with separate rope system.
  • What should edge protection help prevent?
  • Which action should you take if environmental conditions become unsafe during a rope access operation?
  • Which correctly lists the four types of inspection?
  • Which item is included in the Review of Job Safety Analysis?
  • Which statement best describes the purpose of a sit or chest harness?
  • Which role is responsible for the overall safety and coordination of rope access operations at a worksite?
  • Which position is described as the person with the training, skills, experience, and certifications necessary to assume responsibility for the entire rope access work site?
  • The Rescue Plan will include what content?
  • How do you prevent kinking or twisting of rope during operation?
  • What should you check when you inspect a descent device?
  • What is a typical use for a dual main system?
  • Why should tie-in points be accessible and connected to the rope system per SOP?
  • Which statement best describes a tie-in?
  • What is the role of a rigging plan before starting work?
  • Low stretch rope is characterized by elongation of what percentage at 10% of its minimum breaking strength?
  • Sharp or abrasive surfaces on a work site are hazardous because they may
  • Which sequence correctly describes the basic steps of a simple self-rescue with a descender?
  • Provision for prompt rescue is a ________ of the rope access program.
  • What is a possible consequence of not using edge protection on a rope that passes over a sharp edge?
  • What is a simple lowering technique and its importance?
  • How do you determine if an anchor system is properly redundant?
  • What is a key outcome of a well-designed load path through anchors?
  • Fall Zone is defined as which?
  • How should you communicate a dangerous situation to your team?
  • In rope access, the backup rope is used to protect against falls if the main system fails.
  • The minimum strength of a directional anchorage system is determined by which factor?
  • __________ used for rope access shall be designed to prevent inadvertently detachment or removal from the rope under normal use
  • What is the difference between static and dynamic rope in rope access, and which is typically recommended for SPRAT Level 1 work?
  • Why is proper edge protection important during rope movement?
  • What is the role of edge protection in high-angle work?
  • When observing changing weather conditions, what should you do?
  • How should you manage heat and fatigue during rope access work?
  • For a two-rope anchorage system, which statement correctly summarizes the minimum MBS requirement?
  • Which of the following is NOT a responsibility of a rope access technician?
  • The use of a directional anchorage system to deflect a two-rope system from the fall line is called what?
  • What is the primary reason to store rope away from moisture after use?
  • What is the minimum number of people required to work as a team in SPRAT rope access?
  • What is the function of a damping device in rope systems?
  • MBS stands for:
  • Which application describes a dual main system's typical use in rope access operations?
  • Who is responsible for documenting the work experience and training in a rope access team?
  • What is the benefit of belaying from above if possible?
  • How should you ensure proper body positioning while working on a rope?
  • What is a typical indicator of equipment fatigue in a rope access system?
  • Fall Line refers to which of the following in rope access terminology?
  • Which option is NOT an appropriate step when documenting defects or incidents?
  • Ropes used in a rope access for main and back up systems should be
  • During a pre-use inspection, which of the following is an example of contamination to look for?
  • Describe the basic function of a belay device in SPRAT rope access.
  • Ascenders provide attachment points for device lanyards and other devices.
  • Which statement best describes SPRAT's requirement for equipment considered good?
  • Which practice best supports maintaining a controlled environment during a rope operation in the field?
  • Which statement best describes edge protection's effect on rope use?
  • Which statement describes the Review of the Work Environment?
  • Which of the following is a measure to prevent rope wear at edges?
  • Which zone is defined as the area where there is a risk of falling?
  • What is the purpose of a rescue plan?
  • What action should you take immediately when there is a risk of fallen object impact?
  • Which practice helps maintain controlled rope management during operation?
  • How should communication be established on a rope-access job?
  • Which term defines the area where a person is at risk of falling?
  • What is the equivalent of 12 kN in pounds-force (lbf)?
  • What is the purpose of a control line in a belay system?
  • Describe how to set up a basic friction hitch as a backup for control.
  • Which of the following is NOT a sign of rope core damage?
  • Which statement about two independent anchors is true?
  • Explain why redundancy in anchor points is critical in SPRAT Level 1.
  • What is the purpose of a pre-use rope and equipment inspection?
  • What is the purpose of edge guards or rub-strips at anchor points?
  • Which components are included in the main system?
  • The log book for rope access work typically includes:
  • Anchorage Systems guidelines specify a two rope system consisting of a main and backup rope should have an MBS of what, or two times the maximum arrest force of the backup system, whichever is greater?
  • In a dual main system, how are loads distributed?
  • What should the Review of Job Safety Analysis include?
  • Descenders must satisfy which capabilities?
  • What is a Prusik knot used for in rope access?
  • In rope systems, what best describes 'shock loading'?
  • If you are unsure about a rigging configuration, what sequence should you follow?
  • How would you explain the principle of “load sharing” in a two-anchor system?
  • __________ have the responsibility to document the work experience and training of the rope access technicians in their work team
  • Why is it important to maintain a clean work area on a rope access job?
  • When is a changeover of rope or equipment recommended?
  • What is the purpose of a buddy check before starting work?
  • Limited Free Fall Potential is defined as the restriction of possible free fall to no greater than which distance?
  • The _________ is a separately anchored rope used within a backup system to protect against falls if the user slips or a component of the main system fails.
  • A SPRAT Level 1 Technician may perform rope access work under the supervision of which levels?
  • Which factor is not listed as part of evaluating environmental conditions for safe work?
  • During rope access operations, which role is primarily responsible for planning rescue procedures and ensuring equipment readiness on a job site?
  • Which forms of communication are included and reviewed by all members of the work team?
  • In the Review of Job Safety Analysis, which item assesses whether security to anchorage location is necessary?
  • Which item is NOT considered mandatory PPE for SPRAT Level 1 operations?
  • What is the standard method to transport rope to a job site?
  • Lanyards in SPRAT rope access must:
  • What is a basic method to verify rope length and usage during ascent?
  • Which storage practice supports rope longevity after a long job?
  • Tools and equipment heavier than 22 lbs in mass should be suspended with a ______ rope system secured to an independent anchorage system.
  • When selecting rope diameter, which outcome is the primary consideration?
  • What is the role of a sit or chest harness in SPRAT Level 1 practice?
  • What should you inspect on a rope before use?
  • Which factor is essential to check to prevent rope damage when guiding ascent near edges?
  • What is the recommended practice for rope care after a long job?
  • What are the basic signs of rope core damage?
  • What are the four components that make up an Access Work Plan?
  • The ______ is any area outside the hazard zone or the fall zone.
  • The attachment point on the harness the rope access backup system typically connects to is the
  • During a rope access operation, which role should oversee overall safety practices and coordinate emergency procedures?
  • In a restraint or lowering scenario, how should you handle a casualty with suspected spinal injury?
  • The area in which people are at risk of falling such as rope access technicians on-rope or near a working edge is defined as a
  • When should a supervisor be involved in the rope access operation?
  • The requirement for a separate rope system for heavy equipment serves to ensure the heavy tools do not interfere with the main rope system.
  • What is the purpose of a rescue plan in rope access?
  • What is the difference between a tether and a lanyard in rope access?
  • How should you store rope to prevent damage?
  • Describe the role of a friction hitch backup in control?
  • What term describes the person who has the training, skills, experience and certifications necessary to assume responsibility for the entire rope access work site, including management of other rope access technicians?
  • What is the breaking strength for harness attachment points?
  • What is the typical length guideline for lanyards to minimize fall potential?
  • Only ______ carabiners are suitable to use in rope access systems supporting human loads.
  • Pre-cert requirements include:
  • What is the minimum breaking strength for connectors (MBS)?
  • ___________ shall allow for controlled descent and braking.
  • What is a defining feature of ascenders in rope access?
  • What is the main purpose of edge protection in high-angle work?
  • Hazard Zone is defined as which statement?
  • Which term best describes areas where there is a potential for injury due to ongoing work, including items like falling tools or moving gear?
  • A ______ rope consists of an internal load bearing core enclosed within a separate sheath.
  • How should weather exposure be managed to protect rope and equipment?
  • What is the maximum interior angle from the load to the anchorage systems in a dual main system?
  • During an ascent, which action best supports safe rope management?
  • Which practice supports safe operation when weather changes occur?
  • How should you verify a job’s permit-to-work status?
  • Name two common knots used to tie into a rope for SPRAT tasks?
  • When should a communication plan be established?
  • What is the term for the area where hazards exist due to ongoing work, such as loose tools or moving gear?
  • What is the primary objective of a risk assessment before starting a rope access job?
  • Which of the following is true about the communication plan during active work?
  • Hazard Zone is defined as which?
  • How should you document any equipment defects or incidents?
  • If you are unsure about a rigging configuration, what sequence should you follow?
Subscribe

Get the latest from Passetra

You can unsubscribe at any time. Read our privacy policy